Comfort Automation/ Security System Forums > Products > GSM Module > UCM/GSM4 -reporting and responses. |
Moderated by: admin |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
sinky100 Member
|
Hi, Having just fitted a UCM/GSM4 to my system (Comfort II), I am having a couple of issues with which I'm hoping someone can assist with: 1. On changes to the comfigurator for responses using the UCM/GSM4, comfigurator advises the necessity to write to the UCM's EEPROM. On clicking YES, an error returns with "UCM2 is not a UCM/GSM4". This is despite the UCM being polled and listed as such in comfigurator. Is there a reason for this error? The UCM/GSM4 is working fine for SMS arming/disarming & control. I have attached some screenshots. 2. I have written a response which sends an SMS to 2 mobile phones, with custom message number 1. The SMS contains the following text also attached, but does not include the custom message. Any assistance is ghreatly appreciated. Iain Attachment: Capture.PNG (Downloaded 12 times) |
|||||||||
sinky100 Member
|
Attachment 2 Attachment: Capture2.PNG (Downloaded 12 times) |
|||||||||
sinky100 Member
|
Attachment 3 Attachment: image1.PNG (Downloaded 12 times) |
|||||||||
sinky100 Member
|
Sorry guys, The custom message has starting sending the full text, so I am only having the issue number 1. Thanks,Iain |
|||||||||
slychiu Administrator
|
before writing to EEPROM, turn on the IO Monitor. if the error appears, Copy to Cliboard and let us have the Monitor IO contents |
|||||||||
Ingo UCM Pi Users
|
You running Comfort firmware 7.093 or above? It might be this http://www.comfortforums.com/forum79/4352.html |
|||||||||
sinky100 Member
|
Slychui and Ingo, Many thanks for your help. The upgrade of the comfort panel to the latest firmware version seems to have resolved the issue. It seem I was running 7.06X, and the upgrade to 7.099 seems to have cleared the error. I will revert if it comes back. Many thanks again, Iain |