Comfort Automation/ Security System Forums > Products > GSM Module > GSM4 - error writing configuration |
Moderated by: admin |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
rosado.gaspar Member
|
My GSM4, firmware version 7.053, with a SIM card (with no PIN), with "normal/no error" information in the bottom of comfigurator, green LED ON and red LEDs OFF, does not "write to EEPROM", giving the error: "error writing configuration". |
|||||||||
yuanchang Member
|
Can you take a photo of the UCM/GSM and send to support@cytech.biz And do a "Scan of Modules", save the cclx file and send to the same email address as well |
|||||||||
rosado.gaspar Member
|
I´ve just sent the .cclx file and a photo from the UCM/GSM4 to that e-mail address. Thanks |
|||||||||
slychiu Administrator
|
The photo and cclx file appear to have no problems The UCM/GSM4 is the right type However the UCM firmware 6.012 is quite old and this may be not compatible with the UCM/GSM4 Please upgrade by right clicking on the UCM at ID1 and selecting Check for Upgrades |