Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Communications failure on all KP04 keypads
 Moderated by: slychiu
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Wednesday Jul 22nd, 2015 05:46 pm
   PM  Quote  Reply 
1st Post
richard
Member
 

Joined: Wednesday Jul 22nd, 2015
Location:  
Posts: 3
Status: 
Offline

  back to top

This COMFORT 2 system has been running for four years. Nothing has been changed but both keypads started beeping and showing "communications failure" today. The PIRs are flashing their LEDs when activated and there are LEDs lit on the Pcb in the enclosure. Beeping stopped after keying #. Message still flashing and no keys work at the moment on both keypads. Could you help please.



 Posted: Wednesday Jul 22nd, 2015 06:36 pm
   PM  Quote  Reply 
2nd Post
tech07
Administrator
 

Joined: Thursday Jan 29th, 2009
Location: Singapore
Posts: 106
Status: 
Offline

  back to top

This may be due to a fault on the comfort pcb or a short on the comfort Rs485 bus
Try resetting the comfort by pressing the reset button
Check the integrity of the bus or remove all the keypads and other modules and adding them one by one



 Posted: Wednesday Jul 22nd, 2015 07:27 pm
   PM  Quote  Reply 
3rd Post
richard
Member
 

Joined: Wednesday Jul 22nd, 2015
Location:  
Posts: 3
Status: 
Offline

  back to top

Thanks. Can you confirm where the reset button is please.



 Posted: Wednesday Jul 22nd, 2015 07:59 pm
   PM  Quote  Reply 
4th Post
richard
Member
 

Joined: Wednesday Jul 22nd, 2015
Location:  
Posts: 3
Status: 
Offline

  back to top

I have found the reset button after releasing the upper PCB. I pushed it and the system is now working again. Many thanks for your assistance.



 Current time is 08:09 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems