Moderated by: admin |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
batman Member
|
I need to send a phone call ( with specific words ) when a input on RIO became active I have rainwater reservoir with two pumps and 4 level buoys, one for stop, one for start first pump, one for second pump ( and high level alarm ) and the last for critical level. Any time i reach high level alarm i need to send a phone call and when i reach critical level i also need to send a phone call . Thus anyboby know how to do this. |
|||||||||
slychiu Administrator
|
The RIO inputs cannot be used for alarm The Comfort and SLave inputs can be used to trigger alarms Only alarms can cause a dial out. When the alarm dials to a Voice Phone, it will announce the alarm Type and the zone Input -> Zone Type -> Alarm Type -> Dial out to 8 phones -> announce alarm Type and Zone Name Hence you shuld colnnect these inputs to input of Comfort, LEM or SEM |
|||||||||
batman Member
|
CAn't use virtual input to do this? because i don´t have cables to reach my confort |
|||||||||
slychiu Administrator
|
Virtual Inputs can be assigned by some external UCMs like Cbus, KNX, Zwave etc RIOs are designed for non-alarm applications You can add a Slave SEM02 at the same location and use the Slave Inputs instead of RIO |