Author | Post |
---|
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5493 |
Status: |
Offline
|
back to top
|
Known Bugs
- For Heatmiser, read from EEPROM is blank but learning works. May be a problem from Comfiguraut 3.7.6
- in KT03, selecting a few buttons and changing some visual attribute may result in exception. But when the exception is cleared, the attribute is changed correctly
- KP06 Screen shows "Read from Keypad" and "write to keypad" which should not appear. Ignore these buttons
- From Comfigurator 3.9.5. Read from Comfort will cause Functions > Thermostats to fill up the unused Thermostats with sensor 0 and assign Heating and Cooling Outputs to Output 1. You will not be able to control Output 1 after reading from Comfort. In order to free up Output 1, unasssign the outputs from each Thermostat
Bugs Fixed
- For UCM/Zwave, the Virtual Node Info button was missing
- KT03 Button programmed to activate Response did not work - it sent Keypad key command instead
Last edited on Monday Apr 20th, 2015 04:43 pm by slychiu |
juwi_uk
Member
back to top
|
Notice (maybe I missed in earlier releases) some new settings for the KP06.
When I click "Read from Keypad" I get...
Attachment: KPError.png (Downloaded 64 times)
|
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5493 |
Status: |
Offline
|
back to top
|
That is an error. KP06 should not have a Read button
This was mixed up with another product.
|
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5493 |
Status: |
Offline
|
back to top
|
Comfigurator 3.10.2 (Beta) can be downloaded
The changes are
Bugs Fixed- If KP06 Screen shows "Read from Keypad" and "write to keypad", this may happen if the cclx file was created using an older version. Rescan the keypads to remove these buttons
- Fixed bug From Comfigurator 3.9.5. Read from Comfort will cause Functions > Thermostats to fill up the unused Thermostats with sensor 0 and assign Heating and Cooling Outputs to Output 1. You will not be able to control Output 0 after reading from Comfort. In order to free up Output 0, unassign the outputs from each Thermostat
Known Bugs- For Heatmiser, read from EEPROM to Heatmiser modules is blank but learning works. May be a problem from Comfiguraut 3.7.6. Workaround is to use Learn instead of Read from EEPROM
- in KT03, selecting a few buttons and changing some visual attribute may result in exception. But when the exception is cleared, the attribute is changed correctly
Last edited on Monday Apr 20th, 2015 04:46 pm by slychiu |
juwi_uk
Member
back to top
|
slychiu wrote: ...Rescan the keypads to remove these buttons
I found I didn't need to do that as the settings Read/Write buttons are already gone post upgrade to this version.
|