Comfort Automation/ Security System Forums > Support > Comments, Suggestions & Feedback > Rdundant use of panel tamper switch |
Comfort Automation/ Security System Forums > Support > Comments, Suggestions & Feedback > Rdundant use of panel tamper switch |
| Moderated by: admin | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Swiss-Toni UCM Pi Users 
|
I thought i would share this idea for the use of a redundant tamper switch inside the comfort panel & my sem panel (sem panel in picture). As I don't use the tamper switch in my panel as I am constantly in and out of it and I was tired of using a torch to see inside all the time I decided to rig up a led strip light inside the panel. Initially I tried to use the switch but it breaks the circuit when panel is open and unless you wire it into a zone and then use output it cant really be used. Where the switch was i replaced it with a 19mm push on/off switch which a I bought from ebay along with some self adhesive led strip lights the total came to around £10. so not exactly expensive. Things you should lookout for though: Depth of switch (so as not to hit other components) 12V supply (I did not use the comfort supply for lights) Attachment: 20150221_125907.jpg (Downloaded 10 times) |
|||||||||