The Zwave Configurator has undergone changes and is not tested. DO NOT use with ZWAVE till further notice
Cbus2 Response Wizard - Trigger Application action selector 255 is not accepted since Comfigurator 3.8.6)
Slave Low battery message in Comfigurator alert text field shows Door station ID instead of Slave ID
Cbus2 Configurator - Limit Cbus groups to 254
When upgrading UCM/ETH or UCM/USB firmware of the UCM which is directly connected to Comfigurator, and the upgrade is cancelled by pressing the Cancel button, the upgrade could not be restarted due to errors. However if the upgrade is stopped due to other errors eg network time out or reply errors, the UCM upgrade can be restarted.
In Velbus Response wizard, sending commands to VMB1RYNO, VMB4RYNO, VMB1DMI were incorrect.
Improved handling of Firmware upgrades to support UCM 7.060 to recover from failed Firmware upgrades even if the UCM were switched off or reset.
Move "Convert cclx file for iOS/Android app" from HELP to File menu
Keypad Broadcast Enable action includes "All keypads" to be specified in the action.
Extend "Graph References" to include all relevant configuration items, ie Events; Zones , Counters, Flags, Alarms
Changes to UCM/Velbus to support more modules and fix errors in commands to Velbus
Last edited on Friday Oct 31st, 2014 07:40 am by slychiu