Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

UCM/GSM 7.030
 Moderated by: slychiu
 New Topic   Reply   Printer Friendly 
 Rate Topic 
 Posted: Wednesday Nov 6th, 2013 03:14 am
   PM  Quote  Reply 
1st Post

Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3497

  back to top

The UCM/GSM4 firmware 7.030 has been released

This supports UCM/GSM4 features

To upgrade firmware and UCM/GSM3 to UCM/GSM4 see the topic

If an 256K bits EEPROM is not inserted in the U2 socket, UCM/GSM4 will behave like UCM/GSM3 ie it will not send Help messages and status messages by SMS

Please take not of known bugs below

Known Bugs
  1. When 'the H' is shunted, the network strength is wrongly reported in Comfigurator and on-board LEDS shown are wrong.  However, if the UCM/GSM4 is de-selected and reselected again, the strength reported in Comfigurator is correct.
  2. When UCM/GSM loses communication or communication restore, the second phone number in Security Mode tab is not dialled out. Instead, the first phone number is dialled twic
  3. If no feedback type assignment in Control Item, the reply SMS has missing "Control Group" and "Control Item" field.

Note that non-english alphabet is not supported yet eg Chinese, Japanese, Arabic

Incoming SMS commands  in other languages may be accepted if the message has only (, numbers and ) characters

 Current time is 09:57 pm

UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems