Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Comfort to Cbus
 Moderated by: admin
 New Topic   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Saturday May 13th, 2006 10:23 am
   
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4231
Status: 
Offline

  back to top

Comfort the Intelligent Home System is an integrated Security/Home Automation System with Voicemail (http://www.cytech.biz) with extensive interfaces to Lighting and other third party systems, including KNX, Dynalite, Lutron, Rako, Ulti, X10, and Velbus
  • Comfort can be interfaced to Schneider/Clipsal’s C-Bus  (http://www3.clipsal.com/cis/portal/)  using the UCM/CBUS2 Module. Comfort is a CBUS-enabled partner http://www.clipsal.com/entente/entente_partners/certified_c-bus_enabled . The UCM/CBUS2 allows Comfort to control and monitor any Group Address on C-Bus via the CBUS cable alone. Comfort can act as a controller or gateway for the C-Bus system, providing the following benefits to a C-Bus system:
  • telecontrol through any telephone inside or outside the premises to control and monitor the status of devices on the C-Bus
  • allows control from Comfort’s keypads.
  • Allows Comfort Time Programs to schedule C-Bus device
  • allows alarm inputs and alarm conditions to be linked to C-Bus for true integration of alarm and lighting.
  • allows C-Bus switches to trigger Comfort Responses, allowing control of non-C-Bus appliances like air-conditioners, home entertainment systems, and linking to all of Comfort’s security and control functions.
  • The C-Touch touchscreen can be used as a keypad for Comfort, and can display zone and alarm status.
  • functions as a central controller for C-Bus.  C-Bus is a distributed  system with each device having its own intelligence and able to respond according to  its own device type and the way it is programmed. In an intelligent home or  office environment, it can be desirable to have a controller which is able to coordinate the functions of all the subsystems including security, lighting,  and others.  Comfort is able to take action based on conditional logic , for example, when  the time is between 7 PM and 7 AM and the security system is armed, and when the front door is opened, turn on the hall lights for 3 minutes.
  • The UCM/CBUS2, 2nd generation of Cbus Interface supports Trigger, Enable, and Measurement application as well the Lighting, Security and Clocks/Timekeeping applications
See the UCM/CBus on  the Cytech Website  at http://www.cytech.biz/c-bus_interface.html
The UCM/CBUS Instriction Manual can be downloaded from http://www.cytech.biz/product_details.php?item_id=411

This forum is for the discussion and support for all Comfort to Cbus Interface related issues

Attachment: cbus network.jpg (Downloaded 337 times)

Last edited on Tuesday Jun 21st, 2016 06:44 am by slychiu



 Posted: Tuesday Jun 24th, 2014 04:47 pm
   
2nd Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3497
Status: 
Offline

  back to top

The new UCM/Cbus2 2nd  generation Comfort to CBus 2 way interface has been introduced, see http://www.comfortforums.com/forum11/3755.html

The Comfort to C-Bus website is here
http://www.cytech.biz/brochure/comfort-to-c-bus.html

Last edited on Tuesday Dec 12th, 2017 05:59 am by



 Current time is 05:34 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems