DS Manager will discover any UCM/Ethernet modules and show their pre-configured IP Address.
UCM/ETH02 normally is preconfigured with IP address in the range 10.0.51 to 10.0.0.62 but this IP address can be discovered regardless of the IP address of the home network eg 192.168.1.x
If the barrel icon is in blue as shown above, it means that the IP address is on the same network
If the barrel icon is Gray it means that the IP address is on another network (according to the network mask)
If no IP address is visible, it means the the module is not connected physically to the same network
If the IP Address can be seen, click on settings on the right, or double click the IP address
Change the IP Address and Port to an IP Address and Port which is available on the network.
The settings tab should show the information below. There should be no need to change any of the settings below.
If the IP address and port are set correctly, the DS Manager home screen as in the 1st screenshot above should show the barrel icon in blue not gray meaning that the IP address is on the same network
Last edited on Monday Aug 19th, 2013 08:03 am by ident
|
