Comfort  Automation/ Security System Forums Home

 Moderated by: ident  
AuthorPost
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

  1. Need engineer code to access Setting menu so that users cannot accidentally change the ID and cause a communications Failure
  2. "Factory default" option is incorporated into Setting menu. No longer triggered by holding * key for 6 secs.
The latest KP06 Firmware can be downloaded from
http://www.cytech.biz/kp06_firmware.html?category_id=101

slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

Known Bugs
  1. If a KP06 is installed at ID#1 and a 2nd KP06 is connected with the same ID without switching off the power, the ID of the 2nd KP06 cannot be changed using the * menu. The workaround is to reset Comfort. This applies to previous firmware


UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems