Comfort Automation/ Security System Forums > Products > GSM Module > SMS messages no longer include Alarm text |
Moderated by: admin |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Tas Member
|
Hi, After upgrading firmware to 6.022 and uploading a new configuration I have lost the Alarm Phrases. For example, I used to recieve this sms message: 0000-BATTERYWARNING-01 But now I get this: 0000-07-001 Main They keypads display (and say) the right things. It's only SMS messages which are incorrect. Any ideas what I need to do to correct this? Many Thanks, Tas |
|||||||||
slychiu Administrator
|
The SMS messages are taken from the Comfigurator Alarm Types and zone names Write your cclx file to comfigurator again I suspect you have upgraded from a very old version Do a Scan for all modules and detect the UCM/GSM You can enter SMS Alphanumric Text ID in the UCM/GSM configuration so that it sends text instead of 0000 ie "Tas House- 01-Intruder Alarm - 02 Kitchen Window |
|||||||||
Tas Member
|
My modules are already detected. I've tried writing everything to comfort using comfigurator a couple of times and it hasn't worked. Changing the Alphanumeric ID has worked, but I am still not seeing text for the arm type. I am now getting this. Comfort-07-001 Main Thanks, Tas Last edited on Sunday Sep 16th, 2012 12:16 pm by Tas |
|||||||||
ident Administrator
|
Go to Security Types > Alarm Types not "arm types" the text is in each Alarm Type If you stil have problems can you send your cclx file to support@cytech.biz |
|||||||||
Tas Member
|
I believe I've been looking in the right place. 'arm' was a typo, I meant 'alarm'. I've sent you my cclx file. Thanks you helping |
|||||||||
ident Administrator
|
We have traced this problem. It is due to bug in Comfigurator (up to 3.5.6) if the Response Numbers exceed the maximum number (1023 for Ultra) then the Alarm Type Names are written to Comfort with an illegal character in front. When you Read from Comfort, the alarm type names will have the 1st letter missing The GSm SMS messages for alarm types will also be missing This will be fixed in the next release of Comdfigurator (3.5.7 or later) |
|||||||||
gaynorc Member
|
I have a problem since May when I upgraded comfort firmware (now at 6.020) and comfigurator. It is not exactly as you describe. I do not get certain alarm type messages (e.g. intruder, tamper). The messages arrive completely blank. (See iphone screen print attached). However, I have one alarm type (I call it doorbell) which notifies SMS message correctly to users. Also, if I read the log from Comfort, the alarm type names are correct (not missing first character). Is this explained by your findings about comfigurator? Attachment: Missing SMS.jpg (Downloaded 28 times) Last edited on Sunday Sep 30th, 2012 09:30 am by gaynorc |
|||||||||
ident Administrator
|
Can you send your cclx file to support@cytech.biz so we can check this issue? Thanks |
|||||||||
gaynorc Member
|
I have sent file as requested. Thanks |
|||||||||
slychiu Administrator
|
The UCM/GSM firmware is 5.133. Please upgrade to GSM 6.015 as described in http://www.comfortforums.com/forum98/2650.html |
|||||||||
gaynorc Member
|
Okay, I have upgraded as suggested. That seems to have corrected the problem. Thanks. |