Posted: Sunday Sep 9th, 2012 05:00 am |
|
1st Post |
ident
Administrator
Joined: | Wednesday Aug 9th, 2006 |
Location: | Singapore |
Posts: | 3493 |
Status: |
Offline
|
back to top
|
An Application Note showing how to control the LightwaveRF devices using the Universal UCM with ETH02 can be downloaded from http://www.cytech.biz/lightwaverf_interface_application_note.html?category_id=124
The example cclx file is also available
The Interface requires the wifi-Link used for Iphone/ipad control
One way control from Comfort to LightwaveRF is possible using the UCM/Universal + ETH02
The Universal UCM allows interfacing of almost any 3rd party home automation system with Comfort. This can be ordered with a RS232, RS485 (Isolated) , or Ethernet interface depending on the device to be connected.
The Universal UCM with ETH03 interface is required for LightwaveRF
The Universal UCM can be programmed for baud rate, parity, checksum and other parameters to match that of the 3rd party device. It has a user interface which allows any command to be sent to the device. Commands or messages can also be received from the other device and mapped to Comfort Registers like Counters, Sensors, Keypad keys and Virtual Inputs. However the LightwaveRF product is only one way, ie it accepts commands but does not send status
Universal UCM Interface on the Cytech website
http://www.cytech.biz/universal_ucm_interface.html?category_id=74
Last edited on Wednesday Jan 13th, 2016 03:02 am by
|
Posted: Monday Oct 22nd, 2012 01:17 pm |
|
2nd Post |
Posted: Friday Sep 20th, 2013 10:15 am |
|
3rd Post |
wexfordman
UCM Pi Users
Joined: | Monday Jan 1st, 2007 |
Location: | Cork, Ireland |
Posts: | 546 |
Status: |
Offline
|
back to top
|
Just spotted lightwave rf in maplin, and was thinking of gettinga few sockets if I can integrate with comfort.
Is the interface still one way only, or are there waysor plans to make it two way ?
Edit:- Doh! just spotted, lightwave is one way only! Think I will stay away so.Last edited on Friday Sep 20th, 2013 10:17 am by wexfordman
|
Posted: Friday Sep 20th, 2013 02:08 pm |
|
4th Post |
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5500 |
Status: |
Offline
|
back to top
|
The Lightwave Interface has to be one way because Lightwave itself is one way, ie it does not send any information back. This keeps their costs down for their DIY market
|
Posted: Saturday Sep 21st, 2013 11:27 am |
|
5th Post |
wexfordman
UCM Pi Users
Joined: | Monday Jan 1st, 2007 |
Location: | Cork, Ireland |
Posts: | 546 |
Status: |
Offline
|
back to top
|
Thanks slychiu,
I spotted that and edited the post. Was only thinking about it to try and get a wireless solution to some outdoor shed. I have velbus so might run a few pairs out for it instead.
Thanks,
Eamon
|
Posted: Saturday Sep 27th, 2014 01:26 pm |
|
6th Post |
admin
Administrator
Joined: | Saturday Mar 3rd, 2007 |
Location: | Singapore |
Posts: | 1200 |
Status: |
Offline
|
back to top
|
It appears the the LightwaveRF API has changed without notice over the last several months
The method of registering a device like Phone or UCM/ETH03 has changed as well as the format of commands to the API
We have not received any reply to requests for technical information so far
We do not recommend any new user to try to implement the LightwaveRF interface via Universl UCM with ETH02/03 until this is cleared up
|
Posted: Sunday Sep 28th, 2014 05:14 pm |
|
7th Post |
MDKKEN
Member
Joined: | Monday Aug 17th, 2009 |
Location: | |
Posts: | 38 |
Status: |
Offline
|
back to top
|
From the lightwave forum
I am using it with Crestron. I have fixed it Wednesday (17.Sep.2014) by adding “100″ in front of every command.All you have to send is “100,!R1D1F1\x0D†and it works fine. No need to reregister or change anything else.
hope this help
|
Posted: Monday Sep 29th, 2014 07:00 am |
|
8th Post |
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5500 |
Status: |
Offline
|
back to top
|
Yes, we also found that out, but it is worrying that the API can change without notice
This can cause a lot of support issues especially if it happens again
Hence I suggest that those who are considering Lightwave with Comfort should be cautious
|
Posted: Tuesday Dec 9th, 2014 01:26 pm |
|
9th Post |
palmlodge
Member
Joined: | Thursday Dec 14th, 2006 |
Location: | United Kingdom |
Posts: | 507 |
Status: |
Offline
|
back to top
|
What's the current thinking with LightwaveRF. Is this a viable extension to Comfort or is ZWave preferred?
Thanks
|
Posted: Tuesday Dec 9th, 2014 02:01 pm |
|
10th Post |
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5500 |
Status: |
Offline
|
back to top
|
There is a bit of uncertainty about Lightwave, with these unnanounced changes in the API. We are not able to contact them unlike when we first started working on the integration, so I would not call this a viable option at this time.
|
Posted: Wednesday Dec 10th, 2014 02:09 am |
|
11th Post |
palmlodge
Member
Joined: | Thursday Dec 14th, 2006 |
Location: | United Kingdom |
Posts: | 507 |
Status: |
Offline
|
back to top
|
It amazes me that that we still don't have just one product that is a viable retrofit.
My CBUS system has been in place 10 years and is rock solid, but it isn't cheap and I don't have their Wireless plugin modules.
Time for Cytech to come up with something? :-)
|
Posted: Wednesday Dec 10th, 2014 08:05 am |
|
12th Post |
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5500 |
Status: |
Offline
|
back to top
|
Time for Cytech to come up with something? :-)
You know what is the best way to make a million dollars from manufacturing Lighting control products??
Start with a billion
|
Posted: Wednesday Dec 10th, 2014 04:37 pm |
|
13th Post |
|