Moderated by: slychiu |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
ident Administrator
|
The new firmware is available from http://www.cytech.biz/ucmknx_firmware.html?category_id=101 Known Bugs
Last edited on Tuesday Feb 19th, 2013 05:14 am by ident |
|||||||||
TheMax74 Member
|
Hello, i noticed an important different behaviour than old firmware. If a KNX group address sends a "ON" telegram, successive "ON" telegrams will not trigger the response associated to the COUNTER linked to the KNX group address, until a new "OFF" telegram is sent. In other words, response is not triggered if the actual group address value is equal to the previous value. "KNX Group address value" versus "response" ON ----> trig response ON ----> OFF ---> trig response OFF ---> ON ----> trig response OFF ---> trig response etc.... With older firmware, the response was triggered everytime a telegram arrives, irrespective of the previous value. "KNX Group address value" versus "response" ON ----> trig response ON ----> trig response OFF ---> trig response OFF ---> trig response ON ----> trig response OFF ---> trig response etc.... May this related to this topic ? Please confirm if this is a bug or it's a normal behaviour that will be mantained in future releases. Thanks Keep up the good work. Best regards. Massimo Last edited on Friday Oct 12th, 2012 04:47 pm by TheMax74 |
|||||||||
ident Administrator
|
No it is not a bug What is the preference? activate responses only when changed or regardless of change ? |
|||||||||
TheMax74 Member
|
Regardless, thanks. |
|||||||||
wiredhome Comfort Distributors
|
Hi Chiu Only when the value has changed should a telegram be transmitted |
|||||||||
ident Administrator
|
If a KNX button is programmed to always send an ON telegram, eg as in a Scene button, that means that Comfort would not activate any response Only when the button toggles the value, would responses work It seems like the "old" way should be better, that Comfort activates the Response regradless of whether the telegram has the same value |
|||||||||
TheMax74 Member
|
Yes ident. You are correct. If you need to filter telegrams, you can do it in the response code. |
|||||||||
TheMax74 Member
|
Ident, can you attach to this post an old firmware? Thanks |
|||||||||
ident Administrator
|
KNX 6.015 was the previous Attachment: KNX6_015.zip (Downloaded 7 times) |
|||||||||
ident Administrator
|
Bug found for UCM/KNX 6.024 KNX to Comfort for Keypad keys, Panic, Time, Date, Arm system, Bypass zone do not work. 1-bit switching, 4 bit dimming, 1 byte scaling, Floating point, Virtual Inputs mapping are OK This will be fixed in the next release soon |
|||||||||
TheMax74 Member
|
I' m still with 6.015 because the behaviour of 6.024 in handling telegrams has changed. Will the next firmware handle telegrams like 6.015? (See your post #6 in this thread) Thanks. |
|||||||||
ident Administrator
|
Why do you prefer the old way, telegram with the same value is sent to Comfort? An explanation will help us to underrstand the concerns, as others prefer the new way It is not advisable to keep using old firmware for long because support will be a problem in future |
|||||||||
TheMax74 Member
|
I have many scenes that work with only "on" telegram. I have all pushbuttons that works in the same way, only "on" telegram are sent, because those are, for example, secondary pushbuttons for garage door, timed lights etc. I boubt to be the only one and i think that others will have same problems. When passed from 6.015 to 6.024, it was a nightmare, so i reverted to 6.015. Telegrams must alway be passed because comfort is a central logic unit (and it has to trap all telegrams to correctly handke logic functions) and not a stupid light actuator. You may provide a checkbox to swith between behaviours, but i really think that not filtering is the correct way. Thanks Last edited on Tuesday Feb 19th, 2013 08:35 am by TheMax74 |
|||||||||
ident Administrator
|
Thanks, you may have a point Do anyy other users have a diffferent opinion? |
|||||||||
gimi Member
|
Any idea when the "KNX to Comfort for Keypad keys, Panic, Time, Date, Arm system, Bypass zone do not work" bug is going to be solved? I am relaying on this functionality to arm/disarm the alarm and right now I cannot do it anymore which is annoying. Any work around while you are working on the fix? Cheers, GIMI |
|||||||||
ident Administrator
|
It is fixed, see http://www.comfortforums.com/forum89/3291.html KNX6.111 and 6.112 available, please read the post to find the differences, related to the "old way" and the "new way" |