ident
Administrator
Joined: | Wednesday Aug 9th, 2006 |
Location: | Singapore |
Posts: | 3493 |
Status: |
Offline
|
back to top
|
Use Comfigurator to Scan for UCMs
The UCM/Dupline willl be discovered and shown in the list
You will be able to create Responses to send commands to Dupline using the Response Wizard
Select “Add Response†to create a new Response, or “Response Wizard†to edit the
selected Response.
To Add a new Response, enter the Response Description in the pop-up window and
press ENTER. The Name will be automatically generated as shown
A new window opens. Select UCM and SmartHouse/Dupline
A dropdown list will show Input, Momentary Input, and Output
For Input, select a Dupline Address A1 to A8, B1, to B8,.... until P1 to P1 (128 Addresses)
Select Action On or OFF
This is equivalent to Pressing a switch on Dupline
Momentary switch means the Dupline switch is pressed and released
Select a Dupline Input. The effect on the Dupline is the same as pressing and releasing the switch. It depends on how the Dupline system is programmed.
Finally selecting Outputs and the Output address A1 to P8 and ON or OFF will force the Dupline Output on or off
|