Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Status LEDs
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Monday Oct 30th, 2006 08:22 am
   PM  Quote  Reply 
1st Post
cgiltrow
Member
 

Joined: Monday Jun 12th, 2006
Location: Johannesburg, South Africa
Posts: 107
Status: 
Offline

  back to top

Hi,

I have a Comfort Ultra I Action 4.233.

I have four spare outputs on a RIO and I would like to use them for Status LEDs on the main panel (which is where the RIO is).  I connected 4 LEDs (with 2.0k resistors in series) and configured the outputs as status outputs in Comfigurator>Security>Status. 

After downloading the LEDs are constantly on and not representing the status correctly.

Any suggestions?

Thanks.



 Posted: Monday Oct 30th, 2006 01:36 pm
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

I am afraid you cannot use RIO outputs for indicating the onboard status leds with the current firmware
That function was done in the very old days and had a check on the output number of 64. It was not updated when the RIO/SCS was introduced. If you were to upgrade your firmware in future (for other reasons) this should have been implemented





 Current time is 06:03 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems