Comfort  Automation/ Security System Forums Home
Comfort Automation/ Security System Forums > Products > KT01 Touchscreen Keypad (OBSOLETE) > KT01 LCD Keypad - Button doesnt work as expected

 Moderated by: admin  
AuthorPost
Stephen Coates
Member
 

Joined: Thursday Oct 19th, 2006
Location: North East, United Kingdom
Posts: 28
Status: 
Offline

  back to top


I have the LCD Keypad, with the standard demo config.
In Control - Lights I have managed to program the top two buttons with toggele
responses that operate outputs (Lighting the LEDs).

This was achieved using Control - 1 and 2.

I then attempted to program the Master OFF button on the control page.
I found that it is configured as 17 in the clipsal program.

Using the same technique in comfigurator I programmed the AllLightsTVOff response.

However when the button is pressed, the outputs are not changed.

adlim
Member


Joined: Wednesday May 3rd, 2006
Location: Singapore
Posts: 210
Status: 
Offline

  back to top

My guess is that the response was assigned in the wrong counter. The group address in the program is in hexadecimal. Hence, it should not be in counter 17, but rather 23 (17 hex).

Stephen Coates
Member
 

Joined: Thursday Oct 19th, 2006
Location: North East, United Kingdom
Posts: 28
Status: 
Offline

  back to top

Thanks for the help. It worked.

'more time needed in the manuals, I think'


UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems