KNX relative dim levels are wrong when SCALE switch is shunted
KNX Floating point EIS5 calculation wrong
Bugs Fixed
When zones are bypassed from Comfort, the mapped KNX group address is not updated with the bypass state
Note that Comfigurator 3.2.9 allows the UCM/KNX Physical address to specify Area 0 (previously areas 1 to 15 only), Line 0 (previously 1 to 15 only) and Address 1 to 255 (previously 1 to 200). This is not a firmware function
Last edited on Saturday Dec 31st, 2011 03:21 am by ident