Comfort Automation/ Security System Forums > Third Party (interfacing to Comfort) > CBus > UCM/CBUS Firmware > UCM/Cbus 5.235 |
Moderated by: admin |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
ident Administrator
|
UCM/Cbus Firmware 5.235 is now available from http://www.cytech.biz/ucmcbus_firmware.html This firmware upgrade is highly recommended because of the new features and bug fixes below. Bugs Fixed
Last edited on Friday Jun 10th, 2011 12:12 pm by ident |
|||||||||
palmlodge Member
|
Do you have any further information on how the AUD01 works with a populated CBUS UCM please ? |
|||||||||
ident Administrator
|
The AUD01 is meant to be connectec to an amplifier and speaker. It allows keypad announcements to be made. It also allows a virtual keypad on a Ctouch to have voice like a real keypad. If the # key is programmed to be # rather than ENTER, then signing in will go into the voice menu. although the sound does not come from the Ctouch itself. The mic and speaker would have to be mounted elsewhere For example you could talk to the visitor on the door station by the Ctouch |
|||||||||
palmlodge Member
|
Hi, no physically - how would you populate the CBUS UCM with the AUD01 board, not what does it do. Thanks |
|||||||||
ident Administrator
|
Sorry I think currently it cannot be one The AUD sits on the same 10 pin connector that the Cbus sim does A forthcoming version of the Cbus SIM will have extended connector above it which will allow the AUD to piggy back on it so it would be a 3 level stack |
|||||||||
Pgordon Member
|
Interestingly, I thought about this very same thing the other day in a slightly different scenario, when I removed an AUD01 board to add an ETH01 board instead... I did notice that the headers were passed through the ETH01 board, and that - physically at least - I could have stacked the AUD01 board back on top... - I wondered if it would work (haven't had an opportunity to try), and allow me to continue to use both modules... So, if the headers physically allow it, is it OK to stack multiple daughterboards onto a UCM? - will all such boards work OK? Cheers. P. |
|||||||||
ident Administrator
|
The pass through pins are designed to allow the AUD sub board to stack ie you can stack a AUD01 on top of an Ethernet, Cbus or other module to add voice and mic functions. Putting a AUD on a cbus module will allow Ctouch to have a simulated keypad with voice However you cannot stack a ETH on top of Cbus or RS232 or other module as there will be hardware conflicts\ |