Comfort Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register
Comfort Automation/ Security System Forums > Support > Problems & Troubleshooting > Problem with IRR

Problem with IRR
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Friday Mar 18th, 2011 10:27 pm
   PM  Quote  Reply 
1st Post
sadam353
Member
 

Joined: Friday Mar 18th, 2011
Location:  
Posts: 4
Status: 
Offline

  back to top

Hello
I have some problems with the Infrared receivers in every zones. They´re all the same like in the picture below.

<img src="/attachment.php?id=467" align="top" alt="irr-01.jpg">

I have this remote control RC01, it works because when I try it using the keypad infrared receiver it works, but only there. In no other place where I have a Infrared receiver it works. Can u guys explain me where the problem might be?
By the way how should I configure the RC01 buttons??

Thanks

Attachment: irr-01.jpg (Downloaded 32 times)


 Posted: Saturday Mar 19th, 2011 02:18 am
   PM  Quote  Reply 
2nd Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

How are the IRR connected to Comfort

The IRR01 must be connected to the RIO01 inputs , not to Comfort, LEM or SEM inputs
Please see the RIO01 manuals which can be downloaded from http://www.cytech.biz/rio_manual.html?category_id=110
The RIO must be in Modules and Settins in Comfigurator


 Posted: Saturday Mar 19th, 2011 06:48 am
   PM  Quote  Reply 
3rd Post
sadam353
Member
 

Joined: Friday Mar 18th, 2011
Location:  
Posts: 4
Status: 
Offline

  back to top

Yes The IRR Is conected to a RIO input.
The problem Should Be In The RIO or In All The IRR?? Logically.

Sorry to configure rc01 commands i shall use configurator?
Thanks


 Posted: Saturday Mar 19th, 2011 12:55 pm
   PM  Quote  Reply 
4th Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

Check the IRRs are connected correctly to the RIO inputs - they have polarity

The IR Received Responses must be programmed to activate a response

What exactly is not working?
Note that the keypad keys on the RC01 will work when pointed at a Keypad, not when pointed at the IRR01


 Posted: Saturday Mar 19th, 2011 01:17 pm
   PM  Quote  Reply 
5th Post
sadam353
Member
 

Joined: Friday Mar 18th, 2011
Location:  
Posts: 4
Status: 
Offline

  back to top

The last point you mentioned ... RC01 is not supposed to work when we point it to the infrared receivers???
Comfigurator is the software I should use to program responses?

The wire is long ... is there a way to find out wich wire is the respective one of the Infrared Receiver ... Sorry asking such easy questions but a professional installed this and then he left me with no support so now I´m trying to get the system.

Thanks


 Posted: Saturday Mar 19th, 2011 03:51 pm
   PM  Quote  Reply 
6th Post
sadam353
Member
 

Joined: Friday Mar 18th, 2011
Location:  
Posts: 4
Status: 
Offline

  back to top

I tried to connect it directly to the RIO it didnt work ... The 12V and IR in any input and the GND in one of those separate 2 input.


 Posted: Sunday Mar 20th, 2011 01:56 am
   PM  Quote  Reply 
7th Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

The keypad part of the RC01 only works when pointed at a keypad, not at the IRR01

If you use the RC01 pointed at IRR01 connected to the RIO01 then you must program the IR Received Responses. The RIO manual can be downloaded from http://www.cytech.biz/rio_manual.html?category_id=110
It is essential to read this as it showns how the IRR01 are connected and how to program the IR Receiver Responses corresponding to the Scene and Room buttons on the RC01


 Current time is 02:26 pm
Comfort Automation/ Security System Forums > Support > Problems & Troubleshooting > Problem with IRR
 Top

UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems