Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Opening door (DM02) with knx
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Wednesday Nov 10th, 2010 06:42 am
   PM  Quote  Reply 
1st Post
JNOG
Member
 

Joined: Tuesday Nov 17th, 2009
Location:  
Posts: 5
Status: 
Offline

  back to top

Is it possible using door station (DM02) to open a door using KNX.
Thanks,
JNog



 Posted: Wednesday Nov 10th, 2010 08:16 am
   PM  Quote  Reply 
2nd Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

You mean the door latch is controlled by KNX?

Yes
Create a Response called eg "Open door using KNX", use the Response  Wizard select UCM > KNX and choose the KNX command to turn on the KNX group address for the door open function

This response should be assigned to Events > Misc Events > Open Door Response

When the doorbell rings, and you answer the phone or keypad then when you press & to open the door, the telegram is sent to KNX



 Posted: Wednesday Nov 10th, 2010 09:16 am
   PM  Quote  Reply 
3rd Post
JNOG
Member
 

Joined: Tuesday Nov 17th, 2009
Location:  
Posts: 5
Status: 
Offline

  back to top

No the door is controlled with DM02.
Thanks
JNog



 Posted: Wednesday Nov 10th, 2010 10:35 am
   PM  Quote  Reply 
4th Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

Then you mean you would like a KNX group address to open the door. That is also simple. Select your open door group address. In the KNX Comfigurator KNX to Comfort, map that group address to any spare Counter, and program a Counter Response which opens the door.

The principle is that KNX group addresses can be mapped to Counters and the counter gets the value of the KNX object, 0 for off and 255 for ON
The Counter Response is activated when the counter is updated by the mapped group address, and the Response can be programmed to do anything in Comfort.

If you are not clear, we can give an example cclx config



 Current time is 11:29 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems