Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register
Comfort Automation/ Security System Forums > Products > GSM Module > How to prevent malicious disarm of Comfort by SMS

How to prevent malicious disarm of Comfort by SMS
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Tuesday Aug 10th, 2010 12:32 pm
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

A question raised by Ingo is How to prevent a programmed CMS number from sending a SMS to disarm Comfort. Only telephone numbers programmed in Comfort are allowed to send SMS commands to Comfort.
Thus a number which is programmed as a CMS phone type may be used to send an SMS to the system to disarm  it?

The answer to this is that it cannot happen, because even if the number programmed as CMS could be used to send an SMS to comfort, it will not be accepted as the number is registered as CMS in Comfort

Last edited on Tuesday Aug 10th, 2010 12:55 pm by slychiu



 Posted: Tuesday Aug 10th, 2010 01:24 pm
   PM  Quote  Reply 
2nd Post
Ingo
UCM Pi Users


Joined: Sunday Jan 21st, 2007
Location: South Africa
Posts: 557
Status: 
Offline

  back to top

Thanks Chiu, the documentation wasn't very clear which phone types were allowed to send SMS's.

Ingo



 Current time is 01:55 am
Comfort Automation/ Security System Forums > Products > GSM Module > How to prevent malicious disarm of Comfort by SMS
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems