Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

UCM/Cbus Firmware 5.200, 5.202
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Tuesday Feb 16th, 2010 01:42 am
   PM  Quote  Reply 
1st Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3497
Status: 
Offline

  back to top

UCM/Cbus 5.202 (12 January 2010)
  • Supports new SIM Module with ST IC
UCM/CBus 5.200 (13 October 2009)
  • UCM/Cbus will not send date and time to C-bus when C-Bus changes date and time unless the date and time is changed, to prevent multiple date and gtime messages on C-Bus caused by either Comfort or C-Bus chaning date and time.
  • Cbus Transmit Buffer increased from 254 to 600 bytes
  • All Comfort zones reported at UCM/Cbus Reset. Note that the BUSY2 led will remain on while Comfort zones are being updated. This may take 30 seconds or so
  • UCM/Cbus supports scanning of UCMs in Comfigurator 3.1.3 and reports Type, firmware version and revision
Please note a bug has been discovered up to Cbus 5.217
  • Sending commands to other applications besides Lighting will update the counter related to the group address. 
Eg when you send a command to Cbus Trigger application at group address 1 to 255, then Counter 1 will change to 255 as well. The Counter should only be updated by the Lighting application
This will be fixed in the next firmware version

Last edited on Thursday Mar 17th, 2011 09:48 am by ident



 Current time is 11:49 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems