Comfort Automation/ Security System Forums > These Forums > NEWS & Announcements > ADSL Protection/Passthrough Board |
Moderated by: admin |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
slychiu Administrator
|
The APB01 ADSL Protection/Passthrough Board allows ADSL broadband signals to pass through Comfort without being affected, so that the ADSL modem can be plugged to Comfort TEL OUT, ie in any telephone socket in the premises Normally the ADSL modem must be connected on TEL IN before the telephone line goes into Comfort, otherwise the ADSL signal will be affected by the voice path in Comfort. Hence the ADSL modem could not be plugged into a telephone socket connected to TEL OUT without having the broadband speed affected. The new APB01 plugs into the TEL IN and TEL OUT connectors and includes TEL IN and TEL out sockets to connect the incoming telephone line and the telephone wires to the home telephones. The ADSL modem is connected to the telephone in connection of the APB01 while the house telephones are connected to TEL OUT on the APB01 The APB01 also provides additional protection from surges on the telephone line from lighting and other disturbances. This will also help to protect the ADSL modewm and other telephone equipment connected to TEL Out Attachment: CIMG0259 small.jpg (Downloaded 69 times) |
|||||||||
slychiu Administrator
|
The picture shows how the APB01 is plugged into the TEL IN and TEL Out connectors on Comfort Note that the APB01 can be reversed in polarity on the TEL IN and Out connections as the two connections are symmetrical Attachment: CIMG0247 small.jpg (Downloaded 69 times) Last edited on Saturday Oct 24th, 2009 08:57 am by slychiu |
|||||||||
admin Administrator
|
The APB01 ADSL Pasthrough/Protection Board fulfills two functions
Attachment: CIMG0259 small.jpg (Downloaded 71 times) Last edited on Sunday May 16th, 2010 03:24 am by admin |
|||||||||
admin Administrator
|
The picture shows an APB01 plugged into Comfort Attachment: CIMG0247 small.jpg (Downloaded 71 times) |
|||||||||
slychiu Administrator
|
The APB01 Manual is now available, see attached Attachment: apbman.pdf (Downloaded 12 times) |
|||||||||
rollem Member
|
With the APB01 installed do I still need micro filters on each of the telephones and the ADSL modem connected to the TELOUT socket? The manual shows them connected without but I suspect they are required. Maybe not on the ADSL modem but on the phones. Thanks in advance, Jon |
|||||||||
admin Administrator
|
You should need the microfilter for the phone only, not the ADSL modem |