admin
Administrator
Joined: | Saturday Mar 3rd, 2007 |
Location: | Singapore |
Posts: | 1200 |
Status: |
Offline
|
back to top
|
Download UCM05 firmware upgrades from here
Version 5.192 (28 July 2009)- Implemented query S? for alarm state 0 to 3. Requires Comfort 5.173
- If counter command from Comfort does not change the value of the counter, dont send CT to the UCM
- Report BYzzss when zone zz is bypassed or unbypassed and B? query
- Improved communications with Comfort immediately after UCM reset so that the initial commands are not missed.
- Added F! Set Flag and F? Query and FL report commands Requires Comfort firmware 5.173
Bugs- No reply to C? And s?
- When Comfort broadcasts counter change >= 128 to 255, this may affect the state of other reported Comfort conditions eg high zone numbers
Version 5.183 (11 May 2009)- Write to Comfort from Comfigurator - if number of bytes received from Comfort is less than requested by PC, dont send the extra no-value bytes to the PC
- RS232/Ethernet/USB Transmit Buffer size increased from 240 to 500 bytes
- Report Sensor state S?NN to UCM
- TM01 mode works with isolated RS485 module
- Fixed bug No reply to C?
- Implemented set sensor command s!nnvv
- TP query works to get Time programj status
- fixed BUG Broadcast to modules type was rejected affects SEM, UCM, KT03
- FIXED bug AM, ER, AR, KL, DB messages sent rubbish characters
- Doorbell command Dbxx implemented where xx is ID
Bugs- Bypass report BY and B? does not work
- FL reported even when not logged in
- When Comfort broadcasts counter change >= 128 to 255, this may affect the state of other reported Comfort conditions eg high zone numbers
Version 5.178 (29 Jan 2009)- Fixed Bug s? Command does not work
- Fixed BUG command WD to UCM EEPROM address 0800 hex does not work if EEPROM is 24C256, (for UCM/KNX)
Bugs- When Comfort broadcasts counter change >= 128 to 255, this may affect the state of other reported Comfort conditions eg high zone numbers
UCM 5.174 (24 November 2008)- Implemented WD write to other UCM EEPROM, RD Read from other UCM EEPROM, WE conformatiom of write to EEPROM, u? Query ID product type, version and revision. Needed for UCM/HDL and other future external UCMs
- Improved Firmware download
- Upload Button on UCM will toggle BUSY1 LED when it is receiving date from Comfort.
- Download Button on UCM will toggle BUSY2 LED when it is sending data to Comfort
- Improved Upload, Download and Copy button reliability and speed
- Confirmed problem with Upload/download butons on UCM If Master/Copy shunts are switched, power must be off and ON, Reset will NOT work
- Firmware download - of any rejection of firmware download occurs, UCM sends NA01, NA02, NA03, NA04 for different terminating conditions to find out why UD command sometimes fails
- Firmware Programming improved, can recover from error
- Implemented u? Query firmware command to support the SCAN for Modules function. Requires Comfort 5.154, SEM 5.156. KP05 1.010, external UCM 5.168
Bugs- When Comfort broadcasts counter change >= 128 to 255, this may affect the state of other reported Comfort conditions eg high zone numbers
Last edited on Saturday May 14th, 2011 07:04 am by |