Comfort Automation/ Security System Forums > Third Party (interfacing to Comfort) > Access Control > FPR DIP switch setting |
Comfort Automation/ Security System Forums > Third Party (interfacing to Comfort) > Access Control > FPR DIP switch setting |
| Moderated by: admin | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
slychiu Administrator 
|
Please note that the FPR01 Controller has a DIP switch setting which may have been set to the wrong position at the factory This DIP switch is near the connectors TD+, TR- etc Positions 1,2,3 (RS485) should be ON Positions 4.5.6 (Rs232) should be OFF Positions 7,8 should be OFF If the switch is not set correctly, there will be no communications between the UCM/Access and the Fingerprint controller The FPR01 manual will be amended to document this is future |
|||||||||
|
slychiu Administrator
|
The FPR manual has now been updated and is now available for download here |
|||||||||