Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Programming a Zone to announce
 Moderated by: slychiu
 New Topic   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Monday Jul 31st, 2006 01:17 pm
   
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4229
Status: 
Offline

  back to top

A zone can be programmed to announce on the keypads whenever it is triggered. This is not referring to Walk test, which is a test mode in which all zones are announced when triggered.

To program a zone to announce, Assign a Response with action Say ZoneName in the Zone Response (using Response Wizard in Comfigurator)

The Zone Response is activated whenever the zone is triggered (eg door open or Movement detected). The Say Zone Name action will cause the programmed zone name to be announced



The Response can be smarter, eg it can announce only at certain times
eg
If Hours >= 7 And Hours < 22 Then
    Say ZoneName
End If


An example file is attached
Zone 1 will will announce when open
Zone 2 will announce only from 7 AM to before 10 PM

This will announce the zone only between 8 PM and 6 AM


Comfort Responses has powerful conditional programming to allow for almost any situation

Attachment: announcezone.zip (Downloaded 17 times)

Last edited on Tuesday May 31st, 2011 01:43 pm by



 Posted: Sunday Aug 4th, 2013 03:04 am
   
2nd Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3497
Status: 
Offline

  back to top

Comfigurator 3.6.x Zone Settings has an "Announce" Checkbox
When checked this zone will anounce its own name when the zone is opened

This requires Comfort firmware 7.009 and above

The action announce zone is needed only for conditional announcements


Last edited on Monday Aug 5th, 2013 02:23 am by



 Current time is 01:11 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems