View single post by slychiu | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Wednesday May 17th, 2006 02:40 pm |
|
||||||||||||
slychiu
|
When a telephone line cut is detected (which takes around a minute), a Phone Trouble alarm is activated. By default, this gives a fast trouble beep for 10 seconds. Although it is possible to program a full alarm to occur when there is a telephone line cut, it is not recommended because of the likelihood of false alarms due to interruption of telephone service If there is a Line cut at the same time as a power failure, the siren is activated immediately. The UCM/GSM module is available for high security installations. This will use the GSM network as a backup when the phone line is unavailable for any reason
|
||||||||||||
|