View single post by slychiu
 Posted: Tuesday Nov 3rd, 2009 07:18 am
PMQuoteReplyFull Topic
slychiu



Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 1696
Status: 
Offline
 The SMS for alarms related to users does report the user number

eg xxxx- System Disarmed - 03 means user 03 disarmed

xxxx- System Armed - 90 means user 90 which is the keypad was used to arm via the one touch keys without any code entered. If a user code was used to arm then the user number 1 to 16 will be reported

For  an alarm related to the module ID , the SMS will be

xxxx- RS485 Comms Failure - 65

where 65 = KP1, 66= KP2, etc 49 = DP1, 50 = DP2, ..., 18 = UCM 2, 19 = UCM 3


This is described in the UCM/GSM Manual


Last edited on Tuesday Nov 3rd, 2009 07:20 am by slychiu
Close Window