View single post by slychiu
 Posted: Wednesday Oct 21st, 2009 09:17 am
 PM  Quote  Reply  Full Topic 
slychiu



Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5495
Status: 
Offline

  back to top

  1. Slave Siren, Strobe and Speaker can be used on Slave
  2. Fixed Bug - initial value of Slave zones reported after reset to Comfort is wrong but subsequent activation is correctly reported. This causes incorrect initial report to Cbus etc
  3. Fixed Bug - Slave zones with Zone Types 17 to 31 all have Sensitivity highest ie 10 ms
  4. Fixed BUG - at reset Slave zones which are ON were reported as OFF then ON
  5. Slave Speaker Output enabled. Outputs same signal as Comfort. Requires Comfort 5.167 and above
  6. Slave STROBE Output enabled. Follows Strobe on Comfort. Requires Comfort 5.167 and above
The firmware can be downloaded from http://www.cytech.biz/semsep_firmware.html

Last edited on Tuesday Apr 26th, 2011 01:20 am by

 Close Window