View single post by slychiu

Posted: Friday Oct 2nd, 2009 05:54 am

Joined:	Saturday Apr 29th, 2006
Location:	Singapore
Posts:	5736
Status:	Offline

Please note that the FPR01 Controller has a DIP switch setting which may have been set to the wrong position at the factory

This DIP switch is near the connectors TD+, TR- etc

Positions 1,2,3 (RS485) should be ON
Positions 4.5.6 (Rs232) should be OFF
Positions 7,8 should be OFF

If the switch is not set correctly, there will be no communications between the UCM/Access and the Fingerprint controller

The FPR01 manual will be amended to document this is future

Close Window