View single post by marinoss | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Saturday Jan 5th, 2008 07:01 pm |
|
||||||||||||
marinoss
|
Sorry for the late reply below: What is the firmware version of the UCM/EIB? EIB 5.131 When you attempt to send a telegram to EIB, please check if the D11 green led blinks There is no LED at the place which is marked as D11 (and as indicated by the EIB UCD pdf). There are other two Green LEDs D1 and D10 which are on. D3 (BUSY2) blinks when a telegram is sent from the UCM/EIB to the EIB Bus No, it was not possible to send an EIB telegram either from Comfort through programming or from WizComfort, nor we were able to trace and outgoing EIB telegram through the EIB bus monitor. SW8 E and F are off to select EIB Physical line 1. Confirmed. Only A and D are shorted. Thanks Last edited on Saturday Jan 5th, 2008 07:02 pm by marinoss |
||||||||||||
|