slychiu
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5493 |
Status: |
Offline
|
back to top
|
Connections to UCM06 and CM9001
- If the Wifi01 has been purchased separately, remove the CM9001 or UCM06 from the enclosure and screw in the 2 standoffs withnuts from the back of the CM9001 or UCN06 PCB so that Wifi01 can be plugged in on top of the PCB.
- If using with UCM06, remove any submodule eg USB01 or ETH03 from UCM06 before mounting Wifi01
- Plug Wifi01 into the 10 way female connector on UCM06 or CM9001 and screws in to the threaded standoff
- Plug the antenna into the MMCX connector on Wifi01. The Antenna should be mounted outside the CM9001 Metal enclosure. The Wifi01 and Enclosure should be mounted in a location that is able to access Wifi.
- For UCM/Wifi, set up the ID on the UCM Base Board (Refer to UCM Manual). For CM9001, ID is not required
.
|