View single post by slychiu | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Saturday May 30th, 2020 07:06 am |
|
||||||||||||
slychiu
|
The ISM06 and ISM07 should not be used to switch 230V (assuming thatis the case from the thick wires) even though the relays are rated for 10A at 230V. This is because the spacing between the relay contacts and the other logic sections on the IRIO PCB is not far way enough so that arcing is possible. If you need to switch higher voltage the more suitable products are IRIO-IO general IRIO and RLE02 in Din rail Enclosures, see http://www.cytech.biz/irio_module_8_io_with_enclosure.html and http://www.cytech.biz/relay_module_with_8_relays_in_din_rail_enclosure.html Let me know if you would like to get this instead
|
||||||||||||
|