slychiu
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5500 |
Status: |
Offline
|
back to top
|
UCM/Logic 7.169- The Counter Response is also activated when UCM/Logic changes a Counter value. Eg by Responses/ Action codes or Control menu. Previously, Counter Response is avtivated only when the counter us changed by a UCM
- No of Responses number from 1024 to 512 affect ucm/log, knx/logic
- Removed x10 responses not used affect knx/logic and ucm/logic
- For plug in eth03 for LGX, UCM/LOG, CM9001, Sensor, Counter, Flag command will echo state eg C! Will report CT
- enabled extended Sensors function
- Fix Bug counter report – if counter reponse changes another counter, the counter report for the changed counter has the same conterid as the original. So if KNX send counter, counter response change another counter and the counter is reported to knx, the counter id remaiins as KNX ucm id so the KNX ignores the new counter report
|