View single post by Krobar
 Posted: Wednesday Nov 21st, 2018 08:03 pm
 PM  Quote  Reply  Full Topic 
Krobar

 

Joined: Saturday Oct 19th, 2013
Location:  
Posts: 27
Status: 
Offline

  back to top

Finally looked at getting my Lutron setup integrated earlier in the week and found a few things were not as expected so wanted to share.

My Setup:
  • Lutron Energi Savr for LightingLutron 
  • Sivoia Blinds
  • CI-NWK-E
  • If using a Universal UCM it seems none of the inbuild Lutron command worked so it seems easier to leave the UCM Command Type option at none. 
  • The NWK-E device requires a login if using Ethernet/Telnet which was awkward so it was easier to connect the RS232 to a Moxa RS232 to Ethernet adapter which removes the login requirement. 
  • Test your command using telnet to the Moxa drive and when you know they work just convert to hex, add "0D" to the end and paste them into the Comfigurator.
Have a couple of question that maybe someone can help with:
  1. What is the difference between using the Alarm to Device tab in the Universal UCM Vs Responses?
  2. How can I set a response to a string received on the Universal UCM?

Last edited on Wednesday Nov 21st, 2018 08:04 pm by Krobar
 Close Window