View single post by slychiu | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Monday Mar 27th, 2017 05:19 pm |
|
||||||||||||
slychiu
|
A major improvement in Comfigurator 3.11.12 is the ability to change the values of Counters, Sensors, Outputs, and Flags from Comfigurator. This is a great help when testing programs especially for IRIO, UCMs like KNX, Cbus, Modbus, Zwave which are based on mapping to Counters, Flags, Sensors and Outputs. For Counters go to Events > Counters and select a Counter check the "Show Status" box The current value of the selected Counter is seen Enter a new value from 0 to 255 in the box. This changes the value of the counter immediately. Note that changing the value of a counter from the UCM like this will also trigger the maped Counter Response For Flags go to Names > Flags and select a Flag check the "Show Status" box The current value of the selected Flag is seen as On or Off. In fact all flags status is seen Click on the On or Off status to toggle it. This changes the value of he flag from On to Off or vice versa For Outout go to Names > Outputs and select an Output check the "Show Status" box The current value of the selected Output is seen as On or Off. In fact all Output status is seen Click on the On or Off status to toggle it. This changes the value of ehe Output from On to Off or vice versa For Sensors go to Events > Sensors and select a Sensor check the "Show Status" box The current value of the selected Sensor is seen Enter a new value from 0 to 255 in the box. This changes the value of the Sensor immediately. Note that changing the value of a counter from the UCM like this will also trigger the mapped Sensor Response
|
||||||||||||
|