View single post by slychiu | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Wednesday Nov 16th, 2016 04:34 pm |
|
||||||||||||
slychiu
|
There is a bug in Comfort firmware 7.113 if the firmware is upgraded from an older version some of the higher numbered unused zones may have nonzero partitions due to unused memory locations now having a meaning The effect of this is it causes a problem while arming if zones are open. The announcement and beeping on the keypads is interrupted and continuous and the system cannot arm. The keypad and Comfigurator cannot sign in until after 5 minutes, the Arming abort Time. The work-around if the system gets into this state is to wait for 5 minutes when the arming aborts. Then check the zones settings in Comfigurator make sure that all zones do not have Partititions>0 (provided this system does not use Partitions), and do a write to Comfort A new firmwware will be released shortly
|
||||||||||||
|