View single post by slychiu
 Posted: Sunday Sep 11th, 2016 06:58 am
 PM  Quote  Reply  Full Topic 
slychiu



Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

Firmware 7.113 is released. No significant difference from 7.112 except for the bug fix


Known Issues
  1. Execute Response in Comfigurator (DA) with multiple actions - security alarm actions eg bypass, Do Alarm cause subsequent actions do not work. eg Bypass zone 1, bypass zone 2, output 1 on Only Bypass zone 1 will work. However the Response executed by Comfort events will work
  2. Bypass action has other problem of clearing a memory bit
  3. After Upgrading firmware to 7.113, some unused zones (Null zone  Type)  may have Partition 3 setting, and this causes the system to be unable to arm, and causes the keypads to give a strange beeping sound. UCM and Keypad is unable to log in until the arming aborts after 5 minutes.
  4. Actions Add counter, Add counter give wrong answer from 7.039
  5. Partition keypad disarm does not off siren when disarm partition if there is a trouble alarm, until the code is entered 2 times
  6. CM9000- OPT firmware bug Clear all outputs action 8 does not work
  7. Do Action 190 serial command DABE does not do the actions following action 190 correctly. The 1st action is continually repeated

Last edited on Saturday Nov 4th, 2017 10:58 am by slychiu

 Close Window