back to top

1. For Partitions, Eng Menu 4,5 say Keypad area announcement gives the wrong partition number
   
2. Execute Response in Comfigurator (DA) with multiple actions - security alarm actions eg bypass, Do Alarm cause subsequent actions do not work. eg Bypass zone 1, bypass zone 2, output 1 on Only Bypass zone 1 will work. However the Response executed by Comfort events will work
3. Bypass action has other problem of clearing a memory bit
4. After Upgrading firmware to 7.113, some unused zones (Null zone  Type)  may have Partition 3 setting, and this causes the system to be unable to arm, and causes the keypads to give a strange beeping sound. UCM and Keypad is unable to log in until the arming aborts after 5 minutes.
5. Actions Add counter, Add counter give wrong answer from 7.039
6. Action 73, 16 Get  keypadId/ If Keypad ID does not work

Last edited on Wednesday Apr 11th, 2018 12:46 pm by slychiu