| PM | Quote | Reply | Full Topic |
| Joined: | Saturday Sep 23rd, 2006 |
| Location: | London, United Kingdom |
| Posts: | 237 |
| Status: |
Offline
|
Yes, I believe that if I do a keypad reset, all is well, and the wrong text message disappears... This is based on the behaviour of the kp06, because as I said, I do a keypad reset on that one every hour because of the other longer standing problem of the lcd going blank...
I installed the system myself. It comprises 1 main panel and 2 SEP's.
I know the wiring to all the keypads therefore... :-)
The first one installed was the kp06, it is approx 3 metres from the main panel, but with the cable route going as it does, it's approx 5-6 metres of cable. This is high quality foil screened cable.
The 2 kp04's are connected off the 2 SEP's one kp per each SEP. I have 6 core cable between the panels connecting - as per the documentation, KA,KB,COM, (not 12v+, as that is generated locally) I also carry voice & mic between panels, so I can support keypads off any panel..
That uses 5 of the available 6 cores, so the 'spare' one I have used to double up the voice line to try to minimise loss of voice quality over the cable runs.
| Close Window |