View single post by slychiu | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Posted: Sunday Nov 15th, 2015 07:24 am |
|
||||||||||||
slychiu
|
The KP06A Keypad is a new version of KP06 that replaces KP06. This looks almost exactly like KP06 and white and black versions are also available. see other faceplates and colours for KP06A ar http://www.comfortforums.com/forum105/2523.html The KP06A Leaflet can be downloaded from http://www.cytech.biz/kp06a_leaflet.html The main changes are that the settings are expanded and these can be read or written by Comfigurator The following Settings can be changed (same as KP04A)
Go to the Modules Tab and Scan for Modules to detect the keypads and modules in the system. Then select KP06A on the left pane. The Properties can be seen on the right pane Change the properties by clicking on the right of the setting. "Write to Keypad" writes the settings to KP07A "Read from Keypad" reads the settings from KP06A Explanation of the KP04A Settings Keypad ID: 1* to 15 ID of Keypad. To check the Keypad ID, press # and 9 keys together. The LCD will display the ID 1 to 15 and the KP firmware Version.see https://www.youtube.com/watch?v=xGpnS74Xpis Key Beep: Soft */ Loud/ Disable Volume of beeps for each key press Alert Beep: Soft */ Loud/ Disable Volume of alert beeps made by the keypad eg Error or Long beep when a wrong code is entered Backlight: Automatic */ Always On/ Always Off Automatic means the LCD and Keyboard backlight turns on when there is an alert or alarm condition. IR Receiver: Enable* / Disable Enable or disable the built-in IR receiver. Used by RC01 Remote control. Voice Broadcast: Enable* / Disable Enable or Disable Broadcast of Announcements. Announcements include Security Mode (Away, Night, Day, Security Off), Alarms, Arming zones. Even if Broadcast announcements are disabled, Full Alarms (eg Intruder, Panic, Fire) will always be announced. Keypad Tamper: Enable* / Disable Enable or Disable the Tamper switch when the KP04A is removed from the base. Date Format: DD/MM/YY * etc Select from different date formats Time Format: 12 Hr*/ 24 Hr Select from different time formats LCD Contrast: 0-63 (default 37) Enter the value of LCD Contrast to suit the room illumination. Backlight Off: 0-31 (default 1) Enter the brightness of the backlight when backlight is off. A positive value allows the LCD to be legible even when the backlight is off. Factory Default: Yes/No* Reset to Factory Default Save Menu (Yes/No*) Save settings? KP06A supports Partitions in Comfort Last edited on Tuesday May 5th, 2020 12:12 pm by slychiu |
||||||||||||
|