back to top

1. Actions Add counter, Add counter give wrong answer from 7.039
2. Sentence upgrade without vocab upgrade does not work, but  Full vocabulary upgrade upgrade works.
   
3. If telephone line not connected, and Ignore Line Cut Box is unchecked  then alert zone will cause an  immediate alarm - This is an old bug. To work around, check "Ignore Line Cut" Box in Security > Configuration Flags
4. Action 73, 16 Get  keypadId/ If Keypad ID does not work

1. Fixed Bug - Deg C/F always was set to deg F in Location 39 (This feature is not used in Comfort yet
   
2. Fix BUG from firmware 6.010  caused F? Query replied FL. Flag query did not return the correct value after reset. Flag states are not changed by soft reset, but F? Always Returns off after reset.
3. Fixed bug DA09 followed by phone offhook causes tone to be generated until reset.
4. Sign in tamper can only be reset by local ie keypad or phone, not from UCM as that may come from Internet.  Only 1 correct sign in from local phone or keypad resets sign in tamper
5. Arming/disarming  fixed problem when system is arming with zones open, but is disarmed without arming,when zones are restored, the restore zones are reported to cms and sms.
6.  Logic engine Firmware can bypass and unbypass zones

Last edited on Sunday Nov 5th, 2017 10:05 am by slychiu