View single post by John W

Posted: Friday Jun 26th, 2015 03:56 pm

John W

Joined:	Wednesday Feb 18th, 2009
Location:	United Kingdom
Posts:	109
Status:	Offline

ok, so I am back home and have checked all the connections to the pir sensors and the panel. I've also done a walk around check, and all seems ok.

All sensors are wired double EOL. The door contacts we have are also double EOL.
I have the cover off the main panel at present, and a screw fitted to keep the tamper switch pressed.
We have a SEP for the outbuildings, and one keypad, no door panels. I havent opened these up to check them.
There is no tamper connected for the bell box.

Today, whilst sat here working the keypad for the alarm started sounding an alarm, and it dialed the registered numbers to report a tamper alarm.
At this time, the alarm was set to security off.

Its just done it again (twice) while I've been writing this.

It says '33 Tamper Alarm', and then a second event immediately clearing it.

Reading the manual it looks like its panel, sep, or keypad, and not any of the zones. Is that correct ?
Can I determine which one, or is simply a case of disabling each in turn (eg replacing switches with links) ?

Cheers,
John.

Close Window