View single post by coder
 Posted: Monday Aug 7th, 2006 12:13 am
 PM  Quote  Reply  Full Topic 
coder

 

Joined: Sunday Aug 6th, 2006
Location:  
Posts: 4
Status: 
Offline

  back to top

I have 3 UCMs, GSM 5-68, C-Bus 5-66 and UCM 5-92 with Tibbo NetModule

I was using version 2.1.0 but the file you sent me had few more entires.

Event27=Change Code User #,Param
Event28=Delete User #,Param
Event29=GSM Trouble ID #,ID
Event30=GSM Restore ID #,ID

I’m assuming that this new file will simply display GSM Restore ID #19

I’m fairly confident that there are no events that could cause an infinite loop (bare in mind that system is stable on the 4.221 firmware). With the 4.234 firmware you don’t have to touch anything (read trigger any events) to enter the reset loop.

I will try downloading the def24.cct file, it may be a challenging task as one has to be very lucky to establish connection to the 4.234 before it enters the reset loop.

Is the configuration stored in the flash rom of the microcontroller? If not, could I upload the def24.cct file using 4.221 and then simply swap the chips?

 Close Window