View single post by Pgordon

Posted: Tuesday Feb 24th, 2015 04:46 pm

Joined:	Saturday Sep 23rd, 2006
Location:	London, United Kingdom
Posts:	237
Status:	Offline

Thanks Chiu. I see there's nothing specifically mentioned about any possible bug fixes in the release notes for the new firmware, but I have uploaded it & I will see what happens.

I don't think the cause is improper seating of the module on the connector... I have pressed it fully down, and as part of the troubleshooting of this I have removed it fully & re-seated it once or twice, always being firm (but fair!) when pressing it down. Also, no physical intervention is required to 'cure' the display issue - for several days at least - just a system reset puts it back to normal.

Is there any possibility it could be related to the fact that I am turning the LCD backlight on & off very frequently - I have it in a PIR response so that the backlight is on whenever anyone walks by the keypad - I found that with the backlight off, the keypad text wasn't easily visible & couldn't be read 'at a glance' when just walking past the keypad, - which I am inclined to do just to check all is well...

Thanks.

Paul G.

Close Window