tman
Joined: | Wednesday Sep 22nd, 2010 |
Location: | United Kingdom |
Posts: | 22 |
Status: |
Offline
|
back to top
|
Pgordon wrote:
I think you misunderstood my point re the audio module... at this stage I'm referring to the temporary workaround of recording a reminder message and playing that back rather than using the real Comfort voice... to record a reminder message, we'd normally speak across open air into a microphone via either a keypad or a house phone... I'm thinking that I should be able to record directly from the TTS engine on my PC into the line-in on the audio module rather than speaking into a keypad...
Ah right. Yes. If you're doing that then the AUD01 module would give you the best quality recording.
If you've got the ETH02 or ETH03 module then you'll need the newer revision of the AUD01 that has a pass through connector on it so you can fit in between the UCM and the Ethernet module. The old AUD01 just had pins on the bottom and no socket on the top so it had to be fitted as the top most module. This is not compatible with the ETH02 or ETH03.
Also be aware that there is a bug related to voice on the AUD01 which is fixed in ULT 7.066+ together with UCM 7.061+.
|