Comfigurator 3.9.2 has been released
The changes from 3.8.10 are
Known Bugs
- Slave Low battery message in Comfigurator alert text field shows Door station ID instead of Slave ID
- Keypad Broadcast Enable action does not allow "All Keypads" to be specified in the action
- Cbus2 Configurator - it is possible to add groups beyond 254
- When upgrading UCM/ETH or UCM/USB firmware of the UCM which is directly connected to Comfigurator, and the upgrade is cancelled by pressing the Cancel button, the upgrade cannot be restarted due to errors. However if the upgrade is stopped due to other errors eg network time out or reply errors, the UCM upgrade can be restarted.
- In Velbus Response wizard, sending commands to VMB1RYNO, VMB4RYNO, VMB1DMI are incorrect.
Note that these bugs may not be due to 3.9.2, ie they were from previous versions
Bugs Fixed- Lutron commands for use in General and Universal UCM had error when more than 1 control Unit is specified
- In Cbus2 Configurator, Read Properties for Cbus did not show the correct value of Resend Sim Options
- Sound types Tone 1 and Tone 2 limits has been changed 151 to 2400 Hz
- When doing Firmware Upgrade of KT03 by UCM, the PC is prevented from going to sleep to allow the upgrade to complete
- Upgrading Firmware and Writing to KT03 via UCM/ETH03 used to have an error when the PC does to sleep due to the long duration of these operations to KT03. The PC is prevented from going to sleep in the new version
New Features- Graphical References for Responses
- Help has Link to App Conversion Utility for the Comfort iOS/android apps
- New Action 190 - wait for Timer (requires Comfort Firmware 7.063)
- New Action 156 - Keypad backlight on/off (requires Comfort Firmware 7.061)
The new features will be described in more detail next
Last edited on Saturday Oct 18th, 2014 12:40 pm by
|