View single post by ident
 Posted: Saturday Apr 19th, 2014 08:40 am
 PM  Quote  Reply  Full Topic 
ident



Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

Ultra 7.053 beta can be downloaded for testing from http://www.cytech.biz/comfort_ultra_firmware.html?category_id=101

The changes are
  1. Added  action 190, timer#, count low, count high for inline delay action.
  2. Do Response after Timer action - if  Response  no = FFFF hex, then do inline response with address action 190.
  3. Fixed BUG - after *1 on Keypad to load text, ucm #1 is detected as HDL
  4. KP06 min version 6.008 so KP06 can check serial no
  5. Max keypads  8 to 15 to support 15 keypads
  6. Do not report date/time change to UCM if change < 2 seconds as SNTP cin eth03 may cause many events in event log
  7. Do alarm report zone will report last zone triggered. Last zone restored is not used.This will work in zone response.

Known Issue
  1. Extra keypads 9 to 15 may be detected after a scan using Comfigurator 3.8.7 to 3.8.8. This happens if the scan is done after initialisation. The workaround is to wait about 30 seconds and  repeat the scan. Pleaese upgrade to ULT 7.057 which does not have this problem

Last edited on Thursday May 22nd, 2014 09:29 am by ident
 Close Window