View single post by ident
 Posted: Friday Apr 11th, 2014 01:06 pm
 Full Topic 
ident



Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

UCM/CBUS2 firmware 7.045 (Beta) can be downloaded from http://www.cytech.biz/ucmcbus2_firmware.html

The changes are;
  1. Fixed Bug - Measurement Application from Cbus was converted to 0  value when Comfort is armed
  2. Fixed Bug - Response wizard to cbus2 may not work for some UCM IDs eg 8
  3. Monitor Mode in Cbus 2 may causes wrong behaviour in other UCMs especially  Zwave
  4. Removed the Custom Zones Application 01 as it is not needed anymore and causes  unneccessary traffic in Cbus. The Security Application Zone Sealed/Unsealed Group handles the display of zone status. The Properties Checkbox in Comfigurator for Cbus2 Zones Application shall be removed.
  5. The Security Application is now automatically enabled if there is a unit that supports in in the C-Bus network, eg C-Touch or C-Gate and disabled if there is not. The Properties Checkbox in Comfigurator for Cbus2 Security Application shall be removed.
  6. Fixed Bug - Dimming cbus by pressing and holding a CBus button to full brightness of 255 or minimum level of 01 did not send the values 255 or 01 to the counter. hence the counter was loaded with the previous level
Many thanks to Ingo for testing the firmware in his extensive C-Bus setup

Last edited on Friday Apr 11th, 2014 03:11 pm by ident
 Close Window